TOOL SELECTION GUIDE
BLIND RIVETS
| BLIND RIVETS | ||||||||||
| 2,4 mm | 3,0 mm | 3,2 mm | 4,0 mm | 4,8 mm | 5,0 mm | 6,0 mm | 6,4 mm | 7,5 mm | ||
| GO-3 |  | |||||||||
| GO-55 |  | AS | AS | |||||||
| GO-360 |  | AS | A | A | ||||||
| EL-48-R |  | A | ||||||||
| GO-40 |  | |||||||||
| EL-64-R |  | |||||||||
| GO-25-SN |  | |||||||||
| EL-64-N |  | |||||||||
| GO-12-R |  | |||||||||
| AIRPOWER 1 |  | |||||||||
| AIRPOWER 2 |  | |||||||||
| AIRPOWER 3 |  | |||||||||
| GO-BR1 |  | |||||||||
| GO-TR1 |  | A (5,2 mm) | A | A | ||||||
| GO-BR2 |  | |||||||||
| A = aluminum / copper S =steel E = stainless steel / monel | Blue field = recommended working range ASE Exceptions are indicated by relevant letters. * = Special nose piece required for setting. | |||||||||
| SEMI-STRUCTURAL BLIND RIVETS | ||||||||
| GO - BULB II | GO - INOX II | |||||||
| 3,2 mm | 4,0 mm | 4,8 mm | 6,0 mm | 3,2 mm | 4,0 mm | 4,8 mm | ||
| GO-40 |  | |||||||
| GO-25-SN |  | |||||||
| AIRPOWER 1 |  | |||||||
| AIRPOWER 2 |  | |||||||
| AIRPOWER 3 |  | |||||||
| GO-BR1 | | |||||||
| GO-BR2 | | |||||||
| A = aluminum / copper S = steel E = stainless steel / monel | Blue field = recommended working range ASE Exceptions are indicated by relevant letters. * = Special nose piece required for setting. | |||||||
| SEMI-STRUCTURAL BLIND RIVETS | ||||||||
| GO - LOCK | M - LOCK | H - LOCK | PREMIUM | |||||
| 4,8 mm | 6,4 mm | 4,8 mm | 6,4 mm | 6,4 mm | 4,8 mm | 6,4 mm | ||
| GO-40 | | AS | * | * AS | AS | AS | ||
| GO-25-SN | | AS | * | * AS | AS | AS | ||
| AIRPOWER 1 | | A | A | |||||
| AIRPOWER 2 | | A | A | |||||
| AIRPOWER 3 | | * | * | |||||
| GO-BR1 | | A | ||||||
| GO-BR2 | | * | * | |||||
| A = aluminum / copper S = steel E = stainless steel / monel | Blue field = recommended working range ASE Exceptions are indicated by relevant letters. * = Special nose piece required for setting. | |||||||
BLIND RIVET NUTS
| BLIND RIVET NUTS | ||||||||
| M3 | M4 | M5 | M6 | M8 | M10 | M12 | ||
| GO-35 |  | AS | ||||||
| EL-8-N |  | |||||||
| GO-510 |  | AS | ||||||
| GO-520 |  | AS | ||||||
| EL-12-N |  | |||||||
| GO-12-N |  | |||||||
| AIRPOWER 4 |  | AS | ||||||
| GO-RN1 |  | |||||||
| GO-RN2 |  | AS | ||||||
| GO-SN1 |  | |||||||
| A = aluminum / copper S = steel E = stainless steel / monel | Blue field = recommended working range ASE Exceptions are indicated by relevant letters. * = Special nose piece required for setting. | |||||||
PIN & COLLAR
| PIN & COLLAR | |||||
| 4,8 / 5,0 | 6,4 / 6,5 | 8,0 | 9,6 | ||
| GO-12-P |  | ||||
| GO-LB1 |  | ||||
| A = aluminum / copper S = steel E = stainless steel / monel | Blue field = recommended working range ASE Exceptions are indicated by relevant letters. * = Special nose piece required for setting. | ||||
